4 Things You Should Do Before Calling a Plumber

ThingstodobeforecallingaplumberWhile some of you may have tried fixing plumbing problems on your own, there will come a time when you’ll need to call a plumber. This is especially true during plumbing emergencies. After all, nothing can replace the expertise and experience of a licensed plumber.

But there are certain things you need to do and know before calling a Firestone Colorado plumber to come and help you. Before you pick up the phone, be sure to take the following steps to ensure that your Firestone plumbing issue is taken care of efficiently and in a timely manner.

Identify the problem

Make sure you know what the problem is before you call a Firestone plumber. It would be of great help if you can provide some details about the problem. If the toilet is overflowing, check to see if other fixtures are also affected.

Can it wait?

Ask yourself, can it wait? If it’s the middle of the night, determine whether or not it should be dealt with immediately or if the problem can wait until the morning.

The leaky faucet in your bathroom that is keeping you up all night may urge you to call the problem at 2:00 am. But if you think about it, it’s just a minor problem. You wouldn’t want to pay for a premium price just to address a leaky faucet in the middle of the night. Assess the urgency of the repair before you make any calls.

Make a list of all the plumbing problems

Take a good look at your Firestone home and make a list of everything that is clogged up, runs or leaks. This way, the plumber can identify the issues quickly and efficiently. This will lessen the number of hours the plumber charges. Plus, it is more economical to have the plumber address a number of issues at the same time than to have him complete just one plumbing repair.

Turn off the water

If you can’t pinpoint the source of the problem, the best thing you can do is to just shut off your main water valve. If the problem is restricted to one place, then turn off the water to that area. If the toilet is overflowing, then turn off the water that leads to the toilet. This will help prevent further damage until the plumber arrives.


Biggest Mistakes Homeowners Make When Plumbing Problems Arise

paradigmSome plumbing problems such as leaking faucets, clogged toilets, leaking water heater and burst pipes are unpredictable. These problems usually occur when you least expect it. While these issues are quite easy to resolve, a lot of homeowners tend to commit some mistakes that may cost them both time and money.

Here are 3 common mistakes homeowners make when plumbing problems arise in Longmont, Colorado.

Hiring a plumber with the lowest rate

Hiring the cheapest plumber in Longmont is one of the most common mistakes people make. Sometimes, amateur plumbers tend to lower their rate in an attempt to attract customers.

You get what you pay for when it comes to these types of services. Hiring an amateur or inexperienced plumber is no better than doing the job yourself.

Ignoring the problem

Some people tend to ignore simple problems like a faucet leak. Why would you hire a Longmont plumber, if it can be resolved by placing a container underneath it, right? No more wasted water. What people fail to realize is that a simple leak can turn into a bigger, more complicated problem when left unfixed. Plus, it will leave you with a sky-rocketing water bill.


In an attempt to save money, some people choose to tackle repairs on their own. While it is okay to handle simple repairs, it is best to leave complicated projects to professional plumbers.

While we understand that the cost of hiring a professional plumber is quite high, you’ll have peace of mind knowing the problem will be addressed in a fast and efficient manner. In case you decide to go the DIY route and you made a mistake during the process, you will then be forced to call a plumber to fix the problem you have caused. You may end up paying more than you would have if you just hired a plumber in the first place.

Winterizing Your Swimming Pool



The leaves are changing color and the weather is getting cold. As the warm memories of summer months start to fade away, it’s time to start thinking about winterizing your swimming pool.

Pool closing time is usually a sad time for everyone, but this is beneficial as it can protect your pool from damage caused by frozen water. Plus, it saves you a lot of time and money when you re-open it in the spring.

Follow the steps below to make pool winterizing a breeze.

Balance the water

Adjust the water to its recommended levels of chlorination, pH, alkalinity and calcium hardness 4 to 7 days prior to closing your pool. This protects the pool from scale buildup and corrosion.

Clean the pool

Make sure that the pool is clean before winterizing. Scoop out any dirt, insects, leaves and other debris. You can either use a vacuum or just fish them out with a net. Then, clean the skimmers and waterline with a brush. Also, remove handrails, ladders, pool cleaners, vacuums, slide, wall fittings, heaters, skimmer baskets or anything else that shouldn’t be on the pool.

Reduce water level

Lower the water level to approximately 6 inches below the return jets and skimmer line. Never drain your pool completely during the winter months as this can lead to damage.

Drain the equipment

Water that is not drained out of your equipment can expand and crack in the winter. Make sure that the filters, pump, heaters and chlorinator are totally drained of water. To do this, you’ll need a shop vac or a compressor. Disconnect hoses from the filter and skimmer. Then, store them in a dry place.

Cover the pool

Place a winter cover on the pool’s surface. Make sure it is installed and tied down securely. This is important so as to prevent dirt, leaves and other debris from getting in.

If you’re not confident that you can winterize your pool on your own, we highly recommend hiring a swimming pool professional.



Erie, Boulder, Louisville, Longmont, Lafayette, Firestone

How to Avoid Common Plumbing Problems This Winter in Erie Colorado


The arrival of winter often brings with it a number of plumbing problems. These can wreak havoc on your plumbing system. Failure to take preventive measures could lead to serious damage and result in expensive repairs.

Here are some ways to prevent major plumbing problems this winter.

Check the sump pump

Sump pumps are a key part of your plumbing and drainage maintenance system. They work hard to keep water out of your basement and keep it dry. Make sure that your sump pump is working properly. You don’t want to deal with water damage while planning out your holiday parties.

Make sure the water heater works properly

Your water heater is used all year round, but it works especially hard during the winter. Make sure that you water heater is in top condition so as to ensure that your family has access to hot water during the drafty months of winter.  Call a plumbing professional and have your water heater serviced before the temperature drops below freezing.

Insulate your pipes

Pipes can freeze when temperature drops below zero. This may result in blockage or burst pipes. To minimize the chances of a burst or frozen pipes, consider applying insulation sleeves to the pipes near the exterior of your home. Also, don’t forget to check pipes for cracks as these can be indicative of freezing.

Clean out drains and gutters

Snow, debris and leaves can block up the drains and gutters of your home. Ice will form if your drain and gutters are collecting too much debris, eventually causing it to break. Take some time to clear out leaves and other debris.

Going away

Pipes that get used on a regular basis are not as likely to freeze up. But your pipes may be in danger of freezing if you’re going on vacation during the winter months. If you’ll be gone for more than a week, consider calling a plumber to drain your pipes.



Easy Ways to Winterize Your Erie, Colorado Home


It’s never too early to prepare your home for winter. Make your home feel warmer without turning up the heat. Follow these tips to help you save money and make sure that you still have money left in your pocket for holiday shopping.

Change furnace filters

Dirty filters restrict airflow and increase energy demand. It is important to clean or replace your furnace filters every month. Many of us tend to forget about this very important step, so be sure to mark a monthly check on your calendar. You can also use a permanent furnace filter to keep your air clean without the hassle.

Caulk any gaps

You want to make sure that your windows and doors are airtight during the winter. Otherwise, you’ll just be wasting money and your home won’t be as warm and comfortable.

Windows are one of the major ways heat leaks out of your house. About 30% of your home’s heat escapes through holes or cracks around the windows and door. Make sure you repair or caulk those gaps.

Dodge the draft

Warm air is rushes out of your door while cold air is rushes in. The draft snake is one of the easiest ways to cut back on energy waste. It is actually very easy to create one yourself. You can use scrap fabrics and fill it with kitty litter or sand for heft. You can also use a rolled bath towel and place it under a drafty door.

Lower water heater temperature

Most manufacturers set water heaters at 140˚ F.  But the truth is, we don’t really need that much steam.  Add to that, it also poses a safety hazard – scalding. Lowering the water heater temperature to 120˚ F can help you save money; while still allowing you to enjoy a relaxing shower.


Remodel Your Bathroom in Time for the Holidays in Erie, CO


It’s officially fall. In a few months time, we’ll be celebrating the holiday season. During those months, you’ll be having a series of holiday parties and welcoming guests into your home. Your extended family and some friends will be arriving and staying with you for a few days.

With everyone busy with other plans and preparations, remodeling projects often take a backseat.  If you think your bathroom is your home’s biggest downfall, begin planning your bathroom remodel today. By having it done early, you can be sure that it is completed before the holidays.

Fixture replacement

Old plumbing fixtures are more likely to give you problems. With all the cooking and activities you have planned out over the holidays, there is no way you can deal with additional problems. Updating your current fixtures will not only prevent plumbing problems, it is also a great way in changing the look of your bathroom.


Over the years, we tend to accumulate toiletries, cosmetics and cleaning supplies. Your guests will need some space to place their things. Empty out the drawers and get rid of your nasty trash.

If you need additional storage, old wooden crates are a great option. You can use them to hold rolled bath towels and extra toilet paper.

Make sure it’s slip-proof

Your parents are probably coming over for the holidays. We all know that accidents such as slipping are common among older adults. So you need to make the bathroom safe for them.

Keep your parents safe by placing non-skid mats inside and outside your tub or shower. We also recommend installing grab handles.


Proper lighting is a necessity in any bath. Unfortunately, the bathroom is often given the least consideration when it comes to interior lighting. Make sure your bathroom is well-lit. Install task lighting, ambient lighting and dimmers.

Also, since your guests are unfamiliar with the place, consider adding a night light. You don’t want anyone to get hurt in the middle of the night.

How to Install a Water Line for a Refrigerator Ice Maker


Imagine the convenience of having cold water and ice cubes anytime you want them, especially on a hot day. You may have a refrigerator with a built-in water dispenser but if you don’t have a water line to connect it to, then it’s no use. Fortunately, running an ice maker water line is such an easy process.

This article will show you how to install a water line to your refrigerator. With a little patience, you can do it on your own.

  1. The first step is to locate a cold-water supply that runs closest to where the refrigerator will be installed – perhaps beneath the sink. Here, you may find 3 water supply lines: one connects to the dishwasher; while two lines connect directly to the faucet. The cold line should be the one on the right side.
  2. Once you’ve identified the supply line, turn in it off. Simply turn the cold water supply line clockwise to close it.
  3. Drill holes through the base cabinet sides and thread the tube from beneath the sink to rear of the refrigerator. Be sure to keep the tubing behind drawers and above storage areas to prevent tube damage.
  4. Route the tubing and attach it to the refrigerator’s water pipe. Make sure you have extra tubing coiled behind the refrigerator.
  5. The ice maker kit includes a valve and a clamp. You need to install the valve on the cold water line under the sink. Place the clamp over the water line and close it around the pipes. This will pierce through the copper tube so that water will flow through the valve. Tighten the screws on each side of the clamp.
  6. Slide the nut and ferule at the end of the line and attach it to the valve. Tighten it with an adjustable wrench.
  7. Turn on the cold water supply and check for leaks. Tighten the connections if there are leaks.
  8. Flush out several gallons of water to purge the line of all the air and make sure it is clean and ready to use.


Easy Ways to Conserve Water This Summer in Weld County



Water can be comparable to gasoline. It used to be cheap and plentiful, but with droughts now more common, water is now in limited supply and is also more expensive.

The hot months of summer may cause you to use more water than any other time of the year. From taking more showers to watering the lawn or filling the swimming pool, there are a lot of areas where we use more water during the summer months. Do your part and help conserve one of the world’s most vital resources. Here are a few tips to reduce water usage this summer.

Check for leaks

If you have undetected leaks around the house, you’re actually wasting 30-500 gallons of water a day. Check for leaks by putting a few drops of food coloring into your toilet tank. You’ll know there’s a leak if the water shows up in the bowl.

Call the plumber to inspect your pipes and address the problem. Also dispose cottons swabs, diaper wipes and facial tissues in the trash can. Do not flush them down the toilet.

Use a glass when brushing

You may not realize it, but if you keep the faucet turned on while brushing your teeth, you’re wasting about 4 gallons of water. That can easily translate to 3,000 gallons of water in a year.

Make it a habit to fill a glass with water when brushing your teeth. You’ll realize that it’s just enough to rinse your mouth and clean your toothbrush.

Time your water sprinkler

Of course, you want your lawn to look like the best one on the block. But in order to achieve that, you’ll need to run your sprinklers more than necessary. Good news is, you can still have a great-looking lawn without wasting too much water. All you need to do is to set the time on your system. Also, make sure they’re not sprinkling the sidewalk, driveway, street or the house. Target water exactly where you want it.

Cover the pool

If you’re fortunate enough to have a swimming pool in the backyard, be sure to cover it. This will not only keep the water from getting dirty, it also prevents evaporation. Remember, water evaporates quickly when the sun is high.

How to Redo Your Bathroom in Boulder on a Tight Budget

According to the Market Forecast Reports, which was published by Kitchen and Bath Business magazine, Americans spend billions of dollars every year on luxury bathrooms. Bathroom renovations can be expensive due to the high cost of bathroom essentials such as bath tubs, sinks and toilets. But the truth is, you don’t have be a millionaire just to create a comfortable and attractive bathroom for your family.  A few simple changes are enough to update the space.

Checkout the tips below and give your bathroom a whole new look without breaking the bank.


If you don’t have a lot to spend but you’re looking to get fast and dramatic change, then this is obviously the place to start. A fresh coat of paint goes a long way in making your bathroom look more inviting and up-to-date.

Paint your wall with a neutral color. Go for soft and soothing tones for a simple and serene look. But if you are looking for a rich, dark hideaway, then opt for warm saturated tones.


Since the bathroom is where you usually store all your toiletries, makeup and other beauty products, keeping it clutter-free is essential. Take time to visit local stores and look for unique storage cubbies that can hold all your stuff.

Hardware fixtures

Do not underestimate the power of changing hardware fixtures. Transform your dingy old cabinet by changing the handle and repainting it. You can also replace light fixtures, towel racks, door handles, cabinets and mirrors to give it a whole new look.


Tile is another major expense. Aside from buying the tile, you also have to spend a lot of time and money in installing it. To save money, you can just focus on fixing everything that needs fixing first. But if you really want to change the feel of the bathroom, we suggest that you invest on unique tiles and focus on high-impact areas like the shower stall walls.