The problem with small leaks isn’t just about the annoying sound that keeps you awake at night. The problem is that they tend to turn into a bigger, more complicated problems in your Firestone home without you even knowing it.
A water leak can be very costly. Not only will it result to a lot of water waste, it can also cause a significant amount of damage to your home; thus, leaving you with a hefty repair bill on hand.
To prevent this from happening, it is important to detect leaks early. Here’s how to trace a water leak in your house.
Check your water meter
This is one of the easiest ways to check if a leak is present in some areas of your Firestone plumbing. Start by turning off all the faucets in your home. Make sure the washing machine and dishwasher are not running. After you’ve done that, check your meter. If it does change despite the water being turned off, then that’s a clear sign that you have a leak. If it doesn’t change, check back again after a couple of hours to make sure you don’t have a slow leak.
Check the pipes
A lot of homeowners do not check their pipes, until they notice a puddle of water appears. Take a quick look at any visible pipes in your Firestone, CO house. If you notice drops of water, buckling or rusting, you know something is wrong.
Check the toilet
Remove the cover of the toilet tank and add a few drops of food coloring. Wait for about 15 to 30 minutes. You know there’s a leak if you see colored water on the bowl.
Another way to check is to listen for leaks. Open the toilet tank and listen very carefully. If you hear the sound of running water, then it’s positive. You have a leak in your toilet. Try to locate where the sound is coming from. This is likely where the leak is coming from.